ATW-RC13 Rack-mount receiver chassis, ATW-RU13 x2 receiver unit and ATW-T1006 x2 boundary microphone/transmitter
The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
Global, Interference-Free Operation
Operating in the 2.4 GHz range (outside TV bands), System 10 PRO is the wireless system you can use anywhere.
Two Channels in a Half-Rack Chassis
The durable chassis can house two receiver units. Use receivers locally or mount remotely via standard Ethernet cable.
Features
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Operates in the 2.4 GHz range – completely free from TV interference
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis (ten receiver units) can be linked and used simultaneously
Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and setup
Three levels of diversity assurance: frequency, time & space
Ground-lift switch helps eliminate audible hum caused by ground loops
Specifications
Overall System
Operating Frequencies
2.4 GHz ISM band (2400 to 2483.5 MHz)
Frequency Response
20 Hz to 20 kHz Depending on microphone type
Operating Range
60 m (200') Open range env. with no interfering signals
Total Harmonic Distortion
<0.05% typical
Operating Temperature Range
0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Body Pack
RF Power Output
10 mW
Battery Life
>7 hours (alkaline) Depending on battery type and use pattern
Battery Type
Two 1.5V AA not included
Dimensions
70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Input Connections
Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V