Recoil Stabilizer™
Professional Studio Monitor Isolator/Stabilizer
Enhances transient response and imaging
Tightens up the bass for greater accuracy
Eliminates resonance and phase anomalies
Improves translation to other audio systems
The Recoil Stabilizer is a nearfield monitor platform that incorporates four different elements to create the whole.
This includes:
Retention pad
Thin no-slip neoprene surface secures the nearfield monitor to the top surface for maximum signal transfer.
Steel platform
Laser cut ¼” (6mm) steel platform adds the necessary stabilizing mass to rigidly hold the nearfield monitor in place.
Curved front panel
Curved front panel eliminates standing waves and adds mass to the platform without increasing the footprint.
Isolation foam
High density open cell acoustic foam provides acoustic isolation to eliminate coupling between loudspeaker and shelf.
Down Fire
The DF or down-fire model introduces a 5º degree angle to compensate for the added 2" (5cm) height that the Recoil Stabilizer will introduce when put in position. This is often a good choice when the near fields are used on a meter bridge or elevated shelf that cannot be adjusted.
RX9-DF
PART # - Z860-1509-05
PROFILE - Down Fire
MAX LOAD - 50lbs (22kg)
SIZE - 15" x 11" (381mm x 279mm)
HEIGHT - 3.125" / 2.125" (88mm / 55mm)