FLUID AUDIO F8S | 8 Inch Subwoofer

F8S

8 Inch Subwoofer

F8S are designed for recording studios, gaming, home theaters and more, the Fluid Audio F8S active subwoofer delivers exceptional bass response in a compact footprint.

Many types of music benefit from bass extension – from Hip-Hop, to House, to Rock. Being able to hear your mix with this bass extension is critical to accurately creating your music. The F8S subwoofer allows you to hear every detail down to 30Hz – and in a compact size.

Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why we included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.

The F8S also has two built-in EQ settings that allow for two different settings – depending on your music: A more conventional Flat response, as well as a “Punch” setting that is perfect for Dance or other mid-bass heavy music.

For further flexibility, the F8S has a variable phase adjustment to fine tune the phase for optimal matching to your L/R monitors (0-180° ), a variable low pass crossover filter control (50-200Hz) and a 80Hz high pass filter (used with foot switch) for satellite connections.

Features

• 200 Watts of class D power with switching power supply
• 8-inch composite paper cone with high temperature voice coil and damped rubber surround
• Active subwoofer
• Front baffle Fader volume control
• Bass-reflex vent port on front baffle for ease of placement
• Amplifier standby function to conserve energy
• XLR balanced and 1/4” balanced/unbalanced inputs and RCA inputs
• XLR balanced and 1/4” balanced/unbalanced outputs
• Variable lowpass filter control: 50Hz-200Hz
• Variable Phase control: 0 - 180°
• Switch for both “Flat” and “Punchy” settings
• 80 Hz highpass filter(with foot switch) for satellite connections
• Included footswitch allows you to turn F8S on and off for auditioning with bass and without

Specifications

• Frequency response: 30-200Hz
• Total amplifier power: 200 watts
• Signal-to noise: > 100dB (typical A-weighted)
• Polarity: positive signal at + input produces outward LF cone displacement
• Input impedance: 20k ohms balanced, 10k ohms unbalanced
• Input sensitivity: 85mV pink noise input produces 97dBA output SPL at one meter with volume control at maximum
• Power: factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
• Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse
• Cabinet: vinyl-laminated, high acoustic efficient MDF
• Size: 13.4” x 10” x 10.5”, 340 x 254 x 270mm
• Weight: 17.4 lbs / 7.9 kg