AUDIENT EVO4-SRB Start Recording Bundle With Interface,studio Mic,headphones & Cable

Record like the professionals. The EVO By Audient EVO SRB Recording Pack is a three-in-one bundle comprised of the EVO 4 audio interface, the SR1 microphone (with shockmount), SR2000 headphones and an XLR cable.

Whether you're a recording artist, a podcaster or a live-streamer, the EVO SRB Recording Pack is a must-have bundle for your home. The SR1 condenser microphone captures every nuance of your voice or instrument with rich and detailed sound. Ran through the EVO 4 audio interface, you can capture studio-grade recordings with ease. The interface is easy to use, with intuitive 'Smart Touchpoints' and loopback functionality, which is a useful tool for live-streaming.

Monitor with precision using the premium-quality SR2000 headphones. The stylish and comfortable design allows you to listen and monitor for hours on end with maximum comfort. Complete with the bundle is a selection of music software and plugins including Cubase LE. Jump into the world of professional-grade recording today with the SRB Recording Pack.

Included:

● 1 x EVO 4 Audio Interface

● 1 x SR1 Condenser Microphone

● 1 x SR2000 Monitoring Headphones

● 1 x Shockmount

● 1 x XLR Cable

● Free Software and Plugins

● iOS Compatible

EVO 4 USB Audio Interface:

• 2 x EVO Microphone Preamps
• Class Leading Converters
• Smartgain
• Smart Touchpoints
• JFET Instrument Input
• Speaker Outputs
• Headphone Output
• Ultra-Low Latency
• Monitor Mix
• Loopback Functionality
• USB2.0 Bus Powered
• EVO Control App

EVO by Audient EVO 4 USB Audio Interface Specs:

• Mic Preamps
• Gain Range: 58dB
• Mic Pre EIN: -127dB
• Distortion: less than 0.001 percent
• Crosstalk: Very low
• Converters
• ADC Dynamic Range: 113dB
• DAC Dynamic Range: 113dB
• Windows Latency: 32 Samples: 44.1k: 5ms, 96k: 4.1ms
• 16 Samples: 44.1k: 4.74ms, 96k: 3.9ms
• Audio Resolution: 24-bit/96kHz

SR1 Professional Condenser Microphone Specs:

• Polar Pattern: Uni-directional (Super-cardioid)
• Frequency Response: 20Hz-18kHz
• S/N Ratio: 78dB
• Max. Input SPL: 134dB
• Polar Pattern: Super-cardioid
• Sensitivity: -30dB±3dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 150 ohms ±30 (at 1kHz)
• Load Impedance: greater than or equal to 1000 ohms
• Self Noise: 16dB A-weighted
• Phantom Power Requirement: 48V (±4V)
• Phantom Power Current Draw: 3mA

SR2000 Monitoring Headphones Specs:

• 3m Cable
• Closed Back
• Impedance: 32ohm
• THD : <0.3%
• Frequency Response:15HZ-22KHZ
• Headphone Type: Supra-aural
• Driver Type: Dynamic
• Driver Diameter: 40mm
• Impedance: 32 ohms
• Sensitivity/Max SPL: 95±3dB/105±3dB
• THD: < 0.3 percent
• Frequency Response: 15HZ-22KHZ
• Max. Power: 400MW
• Rating Power: 250MW
• Cable Length: 3 Metres
• Plug: 3.5mm (6.35mm Adaptor Supplied)
• Weight: 233g with cable